Train-O-Matic 02010212 Lokommander II Mini Wired 8 Pin DCC Decoder

Train-O-Matic 02010212 Lokommander II Mini Wired 8 Pin DCC Decoder

Mini Wired 8 Pin NEM652 DCC Decoder. (9 wires + 8 pins)

Size:-

• 19.5 x 11 x 3 mm.
• 0.77 x 0.43 x 0.12 inch.

Functions:-

• 4x AUX (1 wire, 3 soldering pads).
• SUSI soldering pads.

• NMRA compliant DCC locomotive decoder.
• Short (1-127) and long (128-9999) configurable addresses.
• 14, 28/128 speed steps.
• Maximum motor current 1000mA.
• Load compensation and BEMF.
• Speed set at 3 points (Vmin, Vmid, Vmax) or in tabular form.
• Shunting speed.
• Constant distance braking, activated on ABC/DC sector or at zero speed.
• Reduced speed drive on ABC Slow Speed section.
• Penduling function (Push-Pull) without or with intermediate stop.
• Up to 10 dimmable auxiliary outputs.
• Function output maximum 200 mA per output, maximum of all outputs 400mA.
• Output Mapping to functions F0, F1-F12.
• Short-circuit and over-current protection of motor and auxiliary outputs.
• Bidirectional communication RAILCOM.
• SUSI© and LocoWire© interface.
• Outputs for Smart Power Pack (SPP ©).
• Electromagnetic uncoupler drive capability.
• Upgradable software via the programmer, even with the decoder mounted in the locomotive.
• Usable in H0, TT and N scale models.
• Supply voltage 4-24V.
• Ability to set different speeds for forward and reverse.

Download the full manual here:- https://train-o-matic.com/download/tom_lokommander_ii_en.pdf